The BMS123 Smart is a solution for monitoring and protection of all kinds of energy storage systems, battery banks, battery packs and other energy solutions. It was designed in view of the growing needs for the storage of energy from solar (PV) applications.
The BMS123 Smart brings you the complete system for monitoring of the charging, discharging and balancing of the LiFePO4/LiFeYPO4 cells with goal of reaching a complete protection of the batteries against deep discharge and overcharge.
Simple installation, easy settings, smart operation and maximum protection!
The BMS123 Smart is a fully modular system. Each cell of the battery equipped with one small size circuit-board. There are three types of cell circuit-boards needed for the installation. One IN board installed on the first cell, One OUT board installed on the last cell and a regular cell board on each cell between the first and the last cell.
For a battery pack made of 4 cells (12V) you need only one IN, one OUT module and two regular cell modules.
For a larger size battery packs (24V, 48V, etc) you just start with the Complete Set (of 4 cells) and you simply purchase additional number of the regular cell modules to install on additional cells in between the first and the last cell. It is easy to make a complete system for any number of cells!
Example of the configuration of the battery packs:
- 24V pack (with 8 pcs LiFePO4 cells): BMS123 Smart - Complete Set has 4 cells (1x First IN, 1x Last OUT, 2x Single CM) for additional 4 cells just buy 4 more Single Cell Modules (CM).
- 48V pack (with 16 pcs LiFePO4 cells): ): BMS123 Smart - Complete Set has 4 cells (1x First IN, 1x Last OUT, 2x Single CM) for additional 12 cells just buy 12 more Single Cell Modules (CM).
Simple instillation right at the cell level
BMS123 Smart is really Smart: There isno Main Controller Unitfor this BMS system! Everything is integrated at the cell modules directly. The IN and OUR cell modules contain all the hardware components for the basic operation of the whole BMS system. Additionally the OUT cell module gathers all relevant data and transmits them viaBluetooth 4.0 LE (low consumption) to your iOS or Android Tablet of Phone.
The Access to information about your battery pack was never easier. Monitor everything remotely, including daily PV production, daily energy consumption, or for example voltage of all cells at the single screen. Have complete overview of your home energy storage at you Smartphone or tablet!
Smart advantages of the BMS123
- Small size boardinstalled directly at the terminals of each cell
- Single wirecommunication. Easy to assemble the battery pack
- Simple wiring designof the whole system designed for energy storage markets
- No additional Main Controller unit
- No external batteryis needed for operation; the BMS is powered directly from the battery pack
- Detailedmonitoring and balancing functionfor each cell independently
- Check the status ofall cells at single screen
- Excellent pricing ratio: robust and reliable system at very competitive price
- Adjustableintegrated bi-stable low power relaysallowing you to disconnect charger and load at predefined levels
- OptionalFree iOS or Android based softwareto get the extended monitoring dash-board
Simple installation, easy settings, easy and reliable operation
Mode d'emploi (Anglais)