zoom_out_map

Converter DC / DC step up 1200w


€36.00
No tax

The DC / DC converter will allow you to transform a current from a battery or cell to power a small electronic device or LED.

Quantity

 

Paiement sécurisé

 

Livraison sous 1 à 4 semaines

 

Des experts à votre écoute

Module name: 1200W boost constant current module

Input voltage: DC10-60V (direct input 10-60V without jumper cap selection voltage)

Input current: 20A (MAX) exceeds 15A, please add fan cooling (add fan input current can reach 25A when fan input voltage is 12-24V)

Static working current: 15mA (12V liters 20V, the higher the output voltage, the static current will increase)

Output voltage: 12-83V continuously adjustable (the default output is adjusted to 19V shipping, please adjust to other voltage values. If you have a multimeter buyer can adjust it yourself) 12-83V output fixed (for batch customers)Output current: 18A MAX more than 10A, please strengthen the heat dissipation (related to the input and output voltage difference, the greater the pressure difference, the smaller the output current )

Constant current range: 0.5-18A (+/-0.3A)

Input anti-reverse connection: yes (150A power MOS anti-reverse)

Low battery protection: yes (9-50V adjustable)

Working temperature: -40 ~ + 85 degree (increase heat dissipation when ambient temperature is too high)

Working frequency: 150KHz

Conversion efficiency: 92%-97% (efficiency is related to input, output voltage, current, differential pressure. Low differential pressure)

Input overcurrent protection: yes (input over 25A, automatic protection, power does not overpower)

Short circuit protection: yes (input 30A fuse) Double short circuit protection, safer to use.

Input reverse connection protection: yes (150A power MOS tube anti-reverse. Can be reversed for a long time)

Installation method: 4 x 3mm copper columns

Wiring method: terminal block (please use high current pure copper wire)

Module size: length 130mm x width 52mm x height 53mm

Single weight module: 300 grams

 

Output power: = input voltage * 20A, as: 12V input * 20A = 240W the maximum power when 12V input is 240W

Input voltage * 20A for example: 24V input * 20A = 480W, that is: the maximum power is 480W when 24V input

Note: The maximum power is 240W when 12V input, the maximum power is 480W when 24V input, and the maximum power is 720W when 36V input.

Review

No customer reviews for the moment.

Write your review

Converter DC / DC step up 1200w

The DC / DC converter will allow you to transform a current from a battery or cell to power a small electronic device or LED.

Write your review

4 other products in the same category: