Low Frequency Solar Inverter/Charger - Series PV3000 VHM (1-6KW)

Quantity
There are not enough products in stock

 

Paiement sécurisé

 

Livraison sous 1 à 4 semaines

 

Des experts à votre écoute

Low Frequency Solar Inverter/Charger - Series PV3000 VHM (1-6KW)

PV3000 VHM series is a highly cost-effective pure sine wave solar inverter, integrated with 80A MPPT charger; Solar/AC priority is configurable, when setting solar priority, solar energy will charge the batteries in priority, and AC can also charge the batteries when the current of the solar charger is too low, in this way the charge of the system is optimally optimized. it enables the inverter to work with all kinds of home appliances.

Features

  • Pure sine wave output

  • Friendly user interface

  • 3 charging stages

  • MFD (multifunction display)

  • Overload and short circuit protection

  • Set charging voltage/charging current

  • Battery low voltage breakpoint can be set to 1010.511V

  • Energy saving mode

  • Set battery priority utility priority

  • Set wide/narrow mains input voltage range

  • Inverter voltage can be set to 220V230V240V

  • Inverter frequency can be set to 50Hz 60Hz

  • Set utility load on/off switch

  • Built-in 80A MPPT solar charge controller

mnGGNxg8CE7vdty7YHjdO-qbVkV6p7hG2QKes7kZffYIJ-DET8_8jET63zAtVOXdyli_BSL3CO9SJnbpQjWW1N40LO2fYongBHCh0YLREKfjCGz7LZx6C9Z5ocC_96EWfQBJuFSDPV3000 VHM series is a highly cost-effective pure sine wave solar inverter, integrated with 80A MPPT charger; Solar/AC priority is configurable, when setting solar priority, solar energy will charge the batteries in priority, and AC can also charge the batteries when the current of the solar charger is too low, in this way the charge of the system is optimally optimized. it enables the inverter to work with all kinds of home appliances.

Features

  • Pure sine wave output

  • Friendly user interface

  • 3 charging stages

  • MFD (multifunction display)

  • Overload and short circuit protection

  • Set charging voltage/charging current

  • Battery low voltage breakpoint can be set to 1010.511V

  • Energy saving mode

  • Set battery priority utility priority

  • Set wide/narrow mains input voltage range

  • Inverter voltage can be set to 220V230V240V

  • Inverter frequency can be set to 50Hz 60Hz

  • Set utility load on/off switch

  • Built-in 80A MPPT solar charge controller