LITHIUM IRON PHOSPHATE BATTERY — LP16-48100

  • High cycle life: 6,000 cycles for effectively reduced total cost of ownership
  • Longer life: Low maintenance batteries with stable chemistry
  • Built-in Circuit Protection: Battery Management System (BMS) is built in against abuse.
  • Better storage: up to 6 months thanks to its extremely low self-discharge rate (LSD) and no risk of sulfation.
  • Recharge Quickly: Save time and increase productivity with less down time thanks to superior charge/discharge efficiency.
  • Light Weight: Lithium batteries deliver more Wh/Kg while being up to 1/3 the weight of its SLA equivalent.
Quantity
There are not enough products in stock

 

Paiement sécurisé

 

Livraison sous 1 à 4 semaines

 

Des experts à votre écoute

FEATURES AND BENEFITS

  • High cycle life: 6,000 cycles for effectively reduced total cost of ownership
  • Longer life: Low maintenance batteries with stable chemistry
  • Built-in Circuit Protection: Battery Management System (BMS) is built in against abuse.
  • Better storage: up to 6 months thanks to its extremely low self-discharge rate (LSD) and no risk of sulfation.
  • Recharge Quickly: Save time and increase productivity with less down time thanks to superior charge/discharge efficiency.
  • Light Weight: Lithium batteries deliver more Wh/Kg while being up to 1/3 the weight of its SLA equivalent.

Performance may vary by application. All specifications are subject to change without notice to the user. This data is for evaluation purposes only. No warranty is intended or implied by this data. For clarification and up-to-date information, please contact us.

APPLICATIONS

Lithium Iron Phosphate can be used in most applications that use lead-acid, GEL or AGM type batteries. Suitable applications include :

• Solar storage

• Switch apps and more

• Base transceiver station

• Communications equipment

• Central office

• Telecommunication systems

• Electronic cash registers

• Microprocessor-based desktop machine

• UPS

WARNINGS

• DO NOT short circuit, reverse polarity, crush or disassemble.

• DO NOT heat or incinerate.

• DO NOT immerse in liquid.

• Store at 30~50% SOC. A refill every 3 months is recommended. The storage area should be clean, cool, dry and ventilated.

DIAGRAMME SYSTÈME

ELECTRICAL PERFORMANCE

• Nominal capacity: 100 Ah

• Capacity @ 20A: 300 mins

• Energy 5120 Wh

• CAN2.0/RS232/RS485 communication

• Resistance ≤45mΩ @ 50% SOC

• Efficiency >96% Parallel Module Up to 3 packs

CHARGING PERFORMANCE

• Recommended charging current 20A

• Maximum charging current 100A

• Recommended charging voltage 57.6 V

• BMS charging cut-off voltage < 58.4 V (3.65 V/cell)

• Reconnect voltage > 57.6 V (3.6 V/cell)

• Balance voltage < 57.6 V (3.6 V/cell)

• Maximum batteries in the 16 series (*Consult MANDATORY)

DISCHARGE PERFORMANCE

• Maximum continuous discharge current 100 A

• Peak discharge current 110 A (3s)

• BMS discharge cut-off current 150 A (300 ms)

• Balance open voltage 55.2 V (3.45 V/cell)

• Recommended low voltage disconnect 44 V (2.75 V/cell)

• BMS discharge cut-off voltage > 32.0 V (2 s) (2.0 V/cell)

• Reconnect voltage > 40.0 V (2.5 V/cell)

• Short circuit protection 250~500s

COMPLIANCE

• Certifications CE (battery) UN38.3 (battery) UL1642 & IEC62133 (cells)

• UN 3480, CLASS 9 shipping classification

MECHANICAL PERFORMANCE

• Dimensions (L x W x H) 580 x 400 x 145 mm 22.8 x 15.7 x 5.7" Approx.

• Weight 20.0 lbs (44 kg)

• Terminal type DIN POST

• Terminal torque 80 ~ 100 in-lbs (9 ~ 11 N-m)

• Housing material SPPC

• IP65 enclosure protection

TEMPERATURE PERFORMANCE

• Discharge temperature -4 ~ 131 ºF (-20 ~ 55 ºC)

• Charging temperature -4 ~ 113 ºF (0 ~ 45 ºC)

• Storage temperature 23 ~ 95 ºF (-5 ~ 35 ºC)

• BMS High Temperature Cutout 149ºF (65ºC)

• Reconnect temperature 131 ºF (55 ºC)

HEATING SHEET PERFORMANCE

• Heating temperature range -4 to 41 ºF (-20 to 5 ºC)

• Heating time Approximately 1 hour at 7.5 A

• BMS 158ºF (70ºC) Heat Sheet Cutoff

PLAN DIMENSIONS