Lithium iron phosphate battery - LP18-4850 (51,2 V/50 Ah)

Quantity
There are not enough products in stock

 

Paiement sécurisé

 

Livraison sous 1 à 4 semaines

 

Des experts à votre écoute

Lithium iron phosphate battery - LP18-4850 (51,2 V/50 Ah)

Our battery module consists of several cells connected in series and/or in parallel, enclosed in a mechanical structure. The system is modular in design, which allows it to be easily switched to different capacity and power according to your demands. The unit can be wall, floor and server rack mounted.

APPLICATIONS

Lithium iron phosphate can be used in most applications using lead-acid, GEL or AGM type batteries.

Suitable applications include:

• Solar storage • Switch applications and more • Base Transmit/Receive Station • Communications equipment • Central office • Telecommunication systems • Electronic cash registers • Office machine with microprocessor • UPS

FEATURES AND BENEFITS

High cycle life: 4,000 cycles at 80% DoD for truly lower total cost of ownership Longer Life: Low maintenance batteries with stable chemistry. Built-in Circuit Protection: Battery Management System (BMS) is built in against abuse. Better storage: up to 6 months thanks to its extremely low self-discharge rate (LSD) and without the risk of sulfation. Recharge Quickly: Save time and increase productivity with less downtime thanks to superior charge/discharge efficiency. Extreme heat tolerance: Suitable for use in a wider range of applications where the ambient temperature is unusually high: up to +60°C. Light Weight: Lithium batteries deliver more Wh/Kg while being up to 1/3 the weight of its SLA equivalent.

 WARNINGS

•Do NOT short circuit, reverse polarity, crush or disassemble. •Do NOT heat or incinerate. •Do NOT immerse in liquid.

• Store at 30~50% SOC. Recharging every 3 months is recommended. The storage area should be clean, cool, dry and ventilated.